Step & Brick Light SL-08-AL-LEDP

Step & Brick Light SL-08-AL-LEDP by Focus Industries

Construction
Cast aluminum or brass 3 louver brick light.
Stamped stainless steel surface mounting bracket – no back box required.

-AL Models Only
Cast aluminum or brass brick light with high impact white acrylic lens. Stamped stainless steel surface mounting bracket – no back box required.

3 Lens Options
SL-08-LEDP: Standard white acrylic; creates warm 2700K incandescent like color
SL-08-LEDP-SB: Sand Blast clear acrylic; creates soft 3000K halogen like color
SL-08-LEDP-CL: Clear acrylic; bright halogen 3000K color

Gasket
Black neosponge closed cell; .190″ thickness

Light Source
12v, 8w integrated LED flat panel with external driver, warm white 3000K
630 lumens (3000K) / 680 lumens (5200K)

Lifetime Rating
50,000 hours

Socket
None

Materials
Cast Aluminum 

Driver
8w output, 12v AC input. Maximum distance from fixture is 18 feet.
For use with magnetic transformers only

Voltage Range
9 to 18 volts. Optimum operating range of 10 to 15 volts for consistent performance and brightness.

Wiring
Red(+) and Black(-) 18 gauge zip cord from LED panel. Connects to external driver Red(+) and Black(-) 18 gauge zip cord.
Additional 6′ 18/2 zip cord supplied for wiring external driver to main cable.
For 25 foot 16/2 fixture lead wire add -25F to catalog number.

Connection
FA-05 Quick Connector (not supplied) from LED driver to main cable
(12/2, 10/2 or 8/2 only)

Mounting
Stainless Steel surface mount bracket; two screws and wall anchors provided;
Face plate attaches to bracket with two provided set screws

Finish
Aluminum – Black texture polyester powder coat; optional finishes available
Brass – Unfinished; optional finishes available

Caution
MUST BE POWERED BY LOW VOLTAGE AC MAGNETIC TRANSFORMER ONLY

Item
FOCUS-SL-08-AL-LEDP